Good Use of Sunflower Seeds Shelling Machine Conditions and Operational Notes
Several Prerequisites for Making Good Use of Sunflower Seeds Sheller:
(1) when buying sheller, choose the brand goods with good performance. The quality of the machines produced in small factories cannot be guaranteed. Requirements for sheller:
The shelling is clean, the productivity is high, and the sheller with the optional equipment also requires higher cleanliness. The rate of loss is low and the rate of fragmentation is small. High economic benefit. The utility model has the advantages of simple structure, reliable use, convenient adjustment and less power consumption.
(2) sunflower wet and dry suitable: too dry, high crushing rate, big wet will affect work efficiency. Sunflower seeds stored in rural areas are generally too dry, in the shelling, we must pay attention to the frequency of shelling motor, to ensure the whole kernel rate.
(3) the power supply voltage can not be low. If the motor is to work properly, the voltage must be up to its rated voltage. In rural areas, there is only one transformer in a village, and the peasants are scattered, and the wires and circuits used are not very standard, which makes the voltage far from the transformer. The voltage shortage affects the shelling rate and shortens the service life of the equipment.
Operation Methods and Matters Needing Attention of Sunflower Seed Shelling Machine:
(1) before using it, we should check whether the fasteners are tightened, whether the rotating parts are flexible, whether there is grease in each bearing, and whether the shelling unit is placed on a smooth surface.
(2) before using it, check that the power supply voltage switch must be in a disconnected position.
(3) when the motor is started, the steering of the rotor shall be in accordance with the direction indicated on the machine. Idling for a few minutes to see if there is any abnormal sound, and confirm the normal operation before feeding production.
(4) when the sunflower kernel contains more skins, it can adjust the air volume of the cyclone, and increase the suction rate to achieve the goal of sucking the skin.
(5) when the kernel contained in the kernel is not exceeded, the angle of the vibrating motor and the screen surface shall be adjusted in time, so as to improve the selection effect.
(6) when production, people should leave the vibration motor a little farther, so as not to hurt people.
(7) equipment should often remove the dirt on the screen surface and the remaining grain and other debris. To ensure the selection of sunflower kernels. When the equipment is not available, it must be covered well and stored in a dry storeroom to avoid the sun and rain.